Oilfield Drilling Equipment Manufacturer

APS Technology | Success Story

Advantages of the 3D Printed Oilfield Drilling Equipment

  • Shorter lead times and times to market
  • Optimized design increases drilling accuracy, reduces post-processing and production costs
  • Drilling assembly with part count reduced from four separate components to just one
  • Reduction of components by 75 %

"Traditional manufacturing methods have got us this far, but the improved efficiencies of parts created with DMLS are game changers. It creates a domino effect, where longer product life spans lead to less disruption for equipment maintenance, greater drilling time, and lower costs. Ultimately, this makes for a happier customer and additional sales orders."
Paul Seaton | Vice President of Marketing | APS Technology Inc.

 

"We might give the shop a DMLS part that once took 18 hours to produce by traditional means from bar stock. That part would have taken 22-26 hours to print, but it might have features that could not have been manufactured in a traditional way such as organic holes. Now, finishing that part would only require 3-4 hours to machine sealing surfaces and tighten tolerance features."
Chris Funke | Senior Mechnical Engineer | APS Technology

Source: APS Technology | EOS

Additive Manufacturing by EOS – for a New Drilling Experience

APS offers a variety of intelligent tools, including steerable drill motors, vibration dampers, modelling and analysis tools, and logging sensors, in addition to its MWD systems. Aside from the obvious difficulties involved in when cutting rock hundreds of feet under the earth, the pressurized fluid used to cool the drill head and flush away cuttings is highly abrasive and rushes past very fast.

EOS had the perfect solution in store for APS: additive manufacturing based on durable metal. Using this technology, the company was able to build long-lasting parts in a short space of time. The solution is known by the name of: EOSINT M 280DMLS enables designers to create complex geometries that could not previously be manufactured, and challenges such as these have now become far more manageable.

By using EOS technology, APS has reduced the part count in a drilling assembly from four separate components to just one. Aside from the advantages APS has seen in part-count reduction and novel component shapes, designers are finding that product development cycles are substantially shorter. DMLS is also creating cost savings in the company’s extensive machine shop, where jigs and fixtures that once took days or even weeks to machine can now be printed, unattended, overnight.

 

EOS Success Stories

Explore three decades of pioneering 3D printing excellence with EOS

3D Printed Micro-Burner

3D Printed Micro-Burners

Success Story | Euro-K GmbH

Develop and build a multi-fuel burner capable of using gaseous and liquid fuels with additive manufacturing on the EOS M 290.

3D-gedruckter Wärmetauscher von Conflux | © EOS

3D Printed Heat Exchanger

Success Story | Conflux Technology

Conflux Technology has patented a highly efficient, compact heat exchanger design that derives its performance from a geometry that can only be made using additive manufacturing (AM). 

MTU Relies on Additive Manufacturing for Its Series Component Production

Success Story | MTU

EOS Technology enables the cost-effective manufacture of engine components for the Airbus A320neo.