POLYMER SOLUTIONS
FORMIGA P 110 Velocis
  • Innovations in temperature management and software control accelerate heating and recoating process significantly increasing productivity.
  • The running costs are only consumed material and power. No hidden costs. No agents.
  • The precise laser spot with a small focus diameter enables wall thicknesses of less than a half millimeter. The system reliably produces small, delicate parts with the highest surface quality.
  • The system ensures reproducible part properties throughout the entire build volume: for every build job and for every machine. 
  • Parts are fully functional right after unpacking and depowdering. No further post-processing needed.
  • The spot pyrometer enables continuous and accurate temperature control.
  • With 9 commercial polymer materials and 10 combinations of materials/layer thicknesses, EOS is a benchmark in terms of material variety. The EOS ParameterEditor allows customized exposure parameters to be defined based on a proven baseline.
  • The system is user-friendly, requires low maintenance and a minimum of accessories.

EXPOSURE MODULE

LASERS
  • 1 x
    30 W

SOFTWARE

  • EOS SYSTEM SUITE

    EOS System Suite optimizes production by streamlining processes, integrating with MES and shop-floor IT systems, and generating detailed quality reports.

FORMIGA P 110 Velocis

TECHNICAL DATA

BUILD VOLUME 200 x 250 x 330* mm (7.9 x 9.8 x 13.0 in)
LASER TYPE CO₂; 1 x 30 W
PRECISION OPTICS 1 F-theta-lens(es); 1 High-speed scanner(s)
SCAN SPEED up to 5.0 m/s (16.4 ft/s)
POWER SUPPLY 1 x 16 A
POWER CONSUMPTION max. 5.0 kW / typical 3.0 kW

* Height includes build plate

DIMENSIONS & WEIGHT

FORMIGA P 110 Velocis

Height: 2,204 mm / Weight approx. 600 kg

FORMIGA P 110 Velocis

  • PA 1100

    Bike light housings in white, yellow, red, blue and purple  | © EOS
  • PA 1101

    Individual MINI Car Blinker Inlay built on EOS P 396 | © EOS
  • PA 1101 ClimateNeutral

    Powdered polymer material | © EOS
  • PA 1102 Black

    3d printed shineguards made of PA 1101 black
  • PA 2200 Balance

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 CarbonReduced Balance

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 Performance

    Powdered polymer material | © EOS
  • PA 2200 CarbonReduced Performance

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 Speed

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 CarbonReduced Speed

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 Top Quality

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 CarbonReduced Top Quality

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 Top Speed

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2200 CarbonReduced Top Speed

    3D printed spinal surgery parts  | © EOS & Anatomics
  • PA 2201

    Colored spare part for Daimler Busses  | © EOS
  • PA 3200 GF

    3D printed part of steering wheel made of PA 3200 GF | © EOS
  • Alumide

    Smart phone holder made of Alumide
  • EOS TPU 1301

    tpu helmet foam on floor | © EOS

OPTIONAL ACCESSORIES

Unpacking & Sieving Station

Unpacking and sieving station quickly removes excess material from the components, sieve and conveys used powder

Blasting Cabinet

Manually or automatically depowder components using glass or plastic blasting media

Mixing Station

Mixing & Qualitification Station (MQS) for gravimetric dosing, homogenization and condition of new and used powder

Generate und open PDF